@article { author = {Tabatabaei, Seyed Saeid and moafi madani, Seyed hamid}, title = {Seismic Design of the Wharves with Performance-Based and Conventional Force-based Design Methods}, journal = {Civil and Project}, volume = {1}, number = {3}, pages = {10-28}, year = {2019}, publisher = {CM Press}, issn = {2676-511X}, eissn = {2676-511X}, doi = {}, abstract = {Due to the complexity of loads applied to wharves and piers because of their special application as mooring and berthing structures, their design always has many challenges. These structures have a large mass, and the piles and pile caps connections must sustain large inelastic deformations during major earthquakes which force-based design method cannot consider properly. So this study was undertaken to evaluate the full seismic performance of a typical synchrolift wharf located at Hormozgan province with performance-based design method by a series of static pushover analyses for three different hazard levels in accordance with ASCE/COPRI 61-14 code requirements and local seismicity. Soil-structure interaction, material overstrength, and site-specific response spectra were used to determine the displacement demands. The results reveal that using conventional force-based design method leads to the unreliable deck as well as uneconomical pile foundation designs.}, keywords = {Wharves and Piers,Performance-based design,Hazard levels,Seismic Design,Soil-structure interaction}, title_fa = {بررسی و مقایسه نتایج طراحی اسکله‌ شمع و عرشه به روش نیروئی و عملکردی}, abstract_fa = {به دلیل پیچیدگی بارهای وارده به اسکله‌های شمع و عرشه به دلیل نوع کاربردی ویژه آن‌ها به عنوان سازه‌های پهلوگیری، همواره طراحی چنین سازه‌هایی دارای چالش‌های بسیاری می‌باشد؛ به طوری که در سال‌های اخیر شاهد انجام پژوهش‌های نوینی در این زمینه هستیم. پس از رخ داد چند زمین‌لرزه شدید در کشورهای لرزه‌خیز ، مشخص شده است که طراحی لرزه‌ای سازه‌های ساحلی به روش رایج نیروئی نیازمند بازبینی دقیقی دارد به طوری که بتوان رفتار آن‌ها را در هنگام زلزله به درستی پیش‌بینی نمود و ایجاد خسارات به تأسیسات روی عرشه و نیز ناپایداری کلی چنین سازه‌هایی پیشگیری به عمل آورد. در نهایت روش طراحی براساس عملکرد به عنوان روشی با قابلیت اطمینان بالا که می‌تواند میزان خرابی‌های رخ داده در سازه تحت اثر زلزله‌هایی با شدت‌های مختلف را پیش‌بینی نماید، به عنوان روشی مطمئن در بسیاری از کشورهای پیشرو در زمینه سازه‌های دریائی برای طراحی لرزه‌ای اسکله‌ها درنظر گرفته شده است. ولی همچنان شاهد استفاده از روش طراحی نیرویی در کشورمان هستیم که این مسئله ممکن است باعث شود تا در هنگام زلزله شاهد خساراتی جدی در این سازه‌ها و صرف هزینه‌های بسیار زیادی جهت تعمیر آسیبات کنترل نشده باشیم؛ لذا در این مطالعه به بررسی نتایج روش‌های طراحی نیروئی رایج در کشور براساس نشریه 631 ، استاندارد 2800 و نیز روش عملکردی براساس آئین‌نامه ASCE/COPRI 61-14 پرداخته خواهد شد. نتایج بدست آمده نشان می‌دهد که استفاده از روش طراحی عملکردی موجب توزیع بهینه‌تر مقاومت در سازه و افزایش قابلیت اطمینان عملکرد سازه در هنگام زلزله خواهد شد.}, keywords_fa = {اسکله‌های شمع و عرشه,طراحی براساس عملکرد,طراحی به روش نیروئی,آسیب}, url = {https://www.cpjournals.com/article_92412.html}, eprint = {https://www.cpjournals.com/article_92412_ca9990ce9f21a6397b4656a53cac876f.pdf} } @article { author = {Asadi, Mohammad Reza}, title = {Evaluation of the effect of polyurethane paint on mechanical properties and durability of self-compacting concrete containing methaacolene and microsilica}, journal = {Civil and Project}, volume = {1}, number = {3}, pages = {39-56}, year = {2019}, publisher = {CM Press}, issn = {2676-511X}, eissn = {2676-511X}, doi = {}, abstract = {The importance of using concrete as the main material in the construction of structures seems obvious. Due to the high cost of repairs, their durability is of particular importance. Permeability is the most important factor in reducing the durability of structures so that resistance to concrete permeability is the first factor in determining the service life of a structure. . Since long time, researchers and civil engineers and metallurgists have been looking for additives to help them improve the mechanical properties of concrete and have made many successes. In addition to additives such as nano, the effect of exterior materials such as polyurethane paint on the durability of concrete can be investigated. Replacing part of the cement with filler material has been the idea of ​​many recent studies. Numerous reports indicate the use of these materials to improve the mechanical properties of concrete. Most attention has been focused on the use of silica. The aim of this study was to investigate the effect of polyurethane paint on self-compacting concrete containing methacrylene and silica on durability of concrete used in structures.}, keywords = {Meta-kaolin,Microsilica,Self-Compacting Concrete,Durability}, title_fa = {بررسی تاثیر استفاده از رنگ پلی اورتان بروی خواص مکانیکی و دوام بتن خودتراکم حاوی متاکائولن و میکروسیلیس}, abstract_fa = {اهمیت کاربرد بتن به عنوان اصلی ترین ماده در ساخت سازهها امری بدیهی به نظر می رسد. به علت هزینه بالای تعمیرات، مساله دوام در آنها از اهمیت ویژه‌ای برخوردار است. در این بین نفوذپذیری مهم‌ترین عامل در کاهش دوام سازه‌ها است به گونه‌ای که مقاومت در برابر نفوذپذیری بتن اولین فاکتور در تعیین عمر سرویس یک سازه به حساب میآید. از دیر باز محققین و مهندسان عمران و متالوژی به دنبال افزودنی هایی بوده‌اند تا به کمک آن‌ها خواص مکانیکی بتن را بهبود بخشند و در این زمینه موفقیت‌های بسیاری نیز به دست آورده‌اند. علاوه بر افزودنی‌هایی همچون نانو می‌توان تاثیر مواد بیرونی همچون رنگ پلی اورتان را بر روی دوام بتن بررسی نمود. جایگزین کردن بخشی از سیمان با مواد پر کننده ایده مشابه بسیاری از تحقیقات اخیر بوده است. گزارش‌های متعدد حاکی از استفاده از این مواد جهت بهبود خواص مکانیکی بتن است. در این میان بیشتر توجهات به استفاده از و میکروسیلیس معطوف بوده است. در این تحقیق هدف بررسی اثر رنگ پلی اورتان در بتن خودتراکم حاوی متاکائولن و میکروسیلیس بر دوام بتن مصرفی در سازه‌ها می‌باشد.}, keywords_fa = {متاکائولن,میکروسیلیس,بتن خود متراکم,دوام}, url = {https://www.cpjournals.com/article_92475.html}, eprint = {https://www.cpjournals.com/article_92475_e8d763ad32353516c61b98b81df9a2a2.pdf} } @article { author = {mohseni, mohammad}, title = {effect of noise level monitoring system in observe and performance of passive defense components.}, journal = {Civil and Project}, volume = {1}, number = {3}, pages = {29-38}, year = {2019}, publisher = {CM Press}, issn = {2676-511X}, eissn = {2676-511X}, doi = {}, abstract = {The subject of passive defense in the universe is as old as the history of human life. Non-operational defense is a set of unarmed actions that increase their deterrence, reduce vulnerability, enhance national security, continue essential activities, and facilitate crisis management against enemy threats and military action. Given the importance of contractors' knowledge of how contractors are monitored and monitored, it is important to properly implement non-operating defense principles in military projects. This study is a case study of civil engineering contractors trying to assess the extent to which contractors adhere to non-operating defenses as well as how employers are supervised and supervised by contractors.}, keywords = {passive defense,monitoring system,reduce vulnerability}, title_fa = {تاثیر میزان اشراف دستگاه نظارت بر رعایت و اجرای مولفه های پدافند غیر عامل}, abstract_fa = {موضوع پدافند غیرعامل در جهان هستی از قدمتی به اندازه تاریخ زندگی انسان برخوردار است. پدافند غیر عامل عبارت است از مجموعه اقدامات غیر مسلحانه ای که به کارگیری آنها موجب افزایش بازدارندگی، کاهش آسیب پذیری، ارتقاء امنیت ملی، تداوم فعالیت های ضروری و تسهیل مدیریت بحران در برابر تهدیدات و اقدامات نظامی دشمن می گردد. باتوجه به اهمیت موضوع میزان شناخت پیمانکاران و همچنین نحوه پایش و نظارت کارفرما بر اجرای صحیح اصول پدافند غیر عامل در پروژه های نظامی اهمیت زیادی پیدا می کند. این پژوهش با مطالعه موردی بر روی پیمانکاران پروژه های عمرانی سعی بر بررسی میزان پایبندی و شناخت پیمانکاران نسبت به پدافند غیر عامل و همچنین نحوه نظارت و اشراف کارفرما بر روی پیمانکاران را دارد.}, keywords_fa = {پدافندغیرعامل,سیستم نظارت,کاهش اسیب پذیری}, url = {https://www.cpjournals.com/article_92432.html}, eprint = {https://www.cpjournals.com/article_92432_f15a09d9dc73cc4b7a952c89aa830b42.pdf} } @article { author = {Alizadeh Lasaki, Ramzan}, title = {Comparison of Self-Concrete Experiments on Fresh Nano-Particle Density}, journal = {Civil and Project}, volume = {1}, number = {3}, pages = {57-67}, year = {2019}, publisher = {CM Press}, issn = {2676-511X}, eissn = {2676-511X}, doi = {}, abstract = {The construction industry is one of the most important users of nanostructured materials due to its requirements in terms of strength, durability and high performance. The nanosilica and nanomaterials are discussed and the results of the new state experiments of slump current, T50, hopper time V, and box L are investigated. According to the results for all the designs made in this project, the slump flow is reduced compared to the control sample. With nanomaterials, this slump reduction is much more visible. Also, due to the slump decrease in T50 time by adding nanomaterials, we observed that by adding nanomaterials, this increase is longer than the designs containing nano-silica and in this study the funneling time is increased by adding nanomaterials, which increases in the samples containing Nano-copper is much clearer.}, keywords = {Fresh self-compacting concrete,Nanoparticles,Rheological properties}, title_fa = {مقایسه آزمایش‌های مربوط به بتن خود تراکم تازه حاوی نانو ذرات}, abstract_fa = {صنعت ساخت‌ و ساز با توجه به نیازهای خود ازنظر مقاومت، دوام و نیز کارایی بالا، از استفاده‌کنندگان مهم مواد نانو ساختار به شمار می‌رود در این تحقیق به بیان و تفسیر نتایج بدست آمده در زمینه خواص رئولوژیکی و مکانیکی بتن خود تراکم تازه حاوی میکروسیلیس، نانوسیلیس و نانومس پرداخته می‌شود و بررسی نتایج حاصل از آزمایش‌های حالت تازه جریان اسلامپ، T50، زمان قیف V، و جعبه L می‌باشد. براساس نتایج حاصله برای، تمام طرح‌های ساخته شده در این پروژه، جریان اسلامپ نسبت به نمونه کنترل کاهش یافته است. با استفاده از نانومس این کاهش اسلامپ بسیار بیشتر قابل مشاهده می‌باشد. همچنین با توجه به کاهش اسلامپ مقدار زمان T50 با افزودن نانومواد شاهد افزایش آن بودیم که با افزودن نانومس، این افزایش زمان بیشتر از طرح‌های حاوی نانو سیلیس می‌باشد و در این تحقیق زمان قیف عبوری با افزودن نانو مواد افزایش می‌یابد که این افزایش در نمونه‌های حاوی نانو مس بسیار واضح‌تر می‌باشد. هرچند وجود میکروسیلیس و متاکائولن در تمامی نمونه‌های خود موجب افزایش زمان عبوری می‌شود و همچنین نسبت عبوری در L.Box با افزودن نانو مواد کاهش یافته و این کاهش در طرح حاوی 3% نانومس به بیشترین مقدار خود می‌رسد. به طور کلی استفاده از نانو و افزایش درصد استفاده آن در بتن، موجب کاهش کارایی بتن خودتراکم می‌شود.}, keywords_fa = {بتن خودتراکم تازه,نانو ذرات,خواص رئولوژیکی}, url = {https://www.cpjournals.com/article_92497.html}, eprint = {https://www.cpjournals.com/article_92497_b5501a27ff5d454ac1a2cbb7742e5499.pdf} } @article { author = {Asadi, Mohammad Reza}, title = {Investigation of compressive strength and permeability in self-compacting concrete with and without polyurethane paint}, journal = {Civil and Project}, volume = {1}, number = {3}, pages = {68-79}, year = {2019}, publisher = {CM Press}, issn = {2676-511X}, eissn = {2676-511X}, doi = {}, abstract = {The purpose of this study was to investigate the compressive strength and permeability of polyurethane-containing and non-dyed concrete containing methacrylene and silica. The compressive strength of all designs increased with increasing age of concrete compared to the control. As the percentage of nanosilica increased, this increase was maintained and increased to 2%. We also see a 1% replacement resistance in nanosized designs. However, in the replacement designs of 3% nano silica and 3% nano copper at 90 days of age, resistance to control samples was reduced. The permeability test results show that at 28 days old nano-copper up to 2% and nano-silica up to 3% is a better replacement and performs better by increasing the concrete age to 90 days nano-copper.}, keywords = {Self-Compacting Concrete,Polyurethane,Permeability}, title_fa = {بررسی مقاومت فشاری و نفوذپذیری در بتن‌های خودتراکم با و بدون رنگ پلی اورتان}, abstract_fa = {در این تحقیق هدف بررسی مقاومت فشاری و نفوذپذیری در بتن‌های با و بدون رنگ پلی اورتان حاوی متاکائولن و میکروسیلیس می‌باشد. مقاومت فشاری کلیه طرح‌های ساخته شده با افزایش سن بتن نسبت به نمونه شاهد افزایش یافته است. با افزایش درصد نانوسیلیس این روند افزایش حفظ شده و در 2 درصد به بیشترین مقدار افزایش می‌رسد. همچنین در طرح‌های حاوی نانومس شاهد افزایش مقاومت در 1 درصد جایگزینی هستیم. هرچند در طرح‌های جایگزینی 3 درصد نانوسیلیس و 3 درصد نانو مس در سن 90 روزه کاهش مقاومت نسبت به نمونه کنترل بدست آمده است. نتایج آزمایش نفوذپذیری نشان می‌دهد که در سن 28 روزه نانو مس تا 2 درصد و نانو سیلیس تا 3 درصد، جایگزینی بهتر بوده و با افزایش سن بتن به 90 روزه نانو مس عملکرد بهتری دارد. در نمونه‌های بدون رنگ عمق نفوذپذیری بیشتر از نمونه‌های با رنگ می‌باشد و با افزایش سن بتن، در نمونه‌های با رنگ پلی اورتان شاهد کاهش بسیار بیشتر نفوذپذیری در عمق می‌باشیم.}, keywords_fa = {بتن خودتراکم,پلی اورتان,نفوذپذیری}, url = {https://www.cpjournals.com/article_92532.html}, eprint = {https://www.cpjournals.com/article_92532_d44567886fc2a81bb528ad347f13f163.pdf} } @article { author = {Shokati Gourabi, Samira}, title = {Evaluation of the effect of polyurethane paint on the properties of self-compacting concrete containing methaacolene and silica to accelerated chlorine ion penetration}, journal = {Civil and Project}, volume = {1}, number = {3}, pages = {80-89}, year = {2019}, publisher = {CM Press}, issn = {2676-511X}, eissn = {2676-511X}, doi = {}, abstract = {The importance of properly evaluating the strength of the concrete against the penetration of chlorine ions to achieve durable structures is highlighted. Different laboratory methods have been developed to determine the phenomenon of migration and diffusion of chlorine ions into the concrete mass. In this study, chlorine ion penetration decreased in samples containing nanosilica and nanomaterials. Decreasing the chlorine ion penetration means more resistance to penetration in concrete, which is higher in samples containing nano-copper than nano-silica. By adding polyurethane paint to the sample, chlorine ion penetration was reduced in all samples.}, keywords = {Self-Compacting Concrete,ion chlorine,polyurethane paint}, title_fa = {بررسی تاثیر استفاده از رنگ پلی‌اورتان بر روی خواص بتن خودتراکم حاوی متاکائولن و میکروسیلیس نسبت به نفوذ یون کلر تسریع شده}, abstract_fa = {از بزرگترین معضلات دوام سازه های ی بتن مسلح، خوردگی آرماتورهای فولادی در اثر نفوذ یون کلر به داخل بتن می‌باشد. بر این اساس، اهمیت ارزیابی صحیح مقاومت بتن در برابر نفوذ یون کلر برای دستیابی به سازه‌های با دوام مشخص می‌شود. روش‌های آزمایشگاهی متفاوتی به منظور تعیین پدیده مهاجرت و نفوذ یون کلر به داخل جرم بتن گسترش و توسعه یافته‌اند. در این تحقیق نفوذ یون کلر در نمونه‌ها حاوی نانوسیلیس و نانومس کاهش یافته و با افزایش سن نمونه‌های بتن خودتراکم روند کاهش نفوذ یون کلر مشاهده می‌شود. کاهش نفوذ یون کلر به معنای مقاومت بیشتر در برابر نفوذ در بتن می‌باشد که این مقاومت در نمونه‌های حاوی نانو مس بیشتر از نانوسیلیس مشاهده می‌شود. با افزودن رنگ پلی‌اورتان به نمونه شاهد کاهش نفوذ یون کلر در کلیه نمونه‌ها می‌باشیم.}, keywords_fa = {بتن خودتراکم,یون کلر,رنگ پلی‌اورتان}, url = {https://www.cpjournals.com/article_92534.html}, eprint = {https://www.cpjournals.com/article_92534_ae53022e9560b070fe52259bb1108eca.pdf} }