[1] Hesami, S. And Sobhi, S., (1336), "A review of natural bitumen and its effect on the properties of bitumen
and asphalt mixtures," Scientific-Extension Quarterly, Volume 25, Number 32, pp. 13, Persian.
[2] Aflaki, S. and Tabatabaee, N., (2003), "Proposals for modification of Iranian bitumen to meet the climatic
requirements of Iran", Construction and Building Materials, Volume 23, Issue 6, pp. 2141-2150, Persian.
[3] Fakhri, M., (2005), "New methods of designing asphalt mixtures based on performance and proposing a
suitable method for the country," Ministry of Roads and Transportation, Deputy Minister of Education, Research
and Technology, Transportation Research Institute, Persian.
[4] Sengoz, B. and Isikyakar, G., (2002), “Evaluation of the properties and microstructure of SBS and EVA
polymer modified bitumen”, Construction and Building Materials, Volume 22, Issue 3, pp.1231-1305.
[5] Asphalt Institute, (2001), “Quantification of the Effects of Polymer-Modified Asphalt”, 1st ed., United
States.
[6] X. Lu and U. Isacsson, (2000), “Modification of road bitumen with thermoplastic polymers”, Polymer
Testing, Volume 20, Issue 1, pp. 11-26.
[1] Gogonani, H., Aging of polymer and filler modified bitumen, Master Thesis in Civil Engineering - Road and
Transportation, Faculty of Civil Engineering, Isfahan University of Technology, 2015, Persian.
[2] S.Abtahi. M., Dibaji, A. And Goli, A., Bitumen, Modification and Maintenance, Brin Scholars Publications,
1332, Persian.
[3] C. Zhuang, N. Li, W. Zhao, C. Cai, Effects of SBS content on the performance of modified asphalt, in: IOP
Conf. Ser. Mater. Sci. Eng., IOP Publishing, 2011: p. 12022.
www.cpjournals.com ISSN:6262-155X )Civil & Project Journal)CPJ(( پروژه و عمران نشریه
ؾاَ زْٚ، زٚضٜ 2 ،قٕاضٜ 5ٔ ،طزاز 1399،قٕاضٜ پیاپی 15،نفحٝ 11 تا نفحٝ 25
11
[10] J. Yuan, H. Lu, W. Yin, Y. Wu, Influences of Naphthenic Oil on SBS-Modified Asphalt Binder, J. Mater.
Civ. Eng., 31 (2013) 4013162.
[11] P. Lin, C. Yan, W. Huang, Y. Li, L. Zhou, N. Tang, F. Xiao, Y. Zhang, Q. Lv, Rheological, chemical and
aging characteristics of high content polymer modified asphalt, Constr. Build. Mater., 201 (2013) 616–623.
[12] F. Zhang, C. Hu, The Composition and Ageing of High-Viscosity and Elasticity Asphalts, Polym. Compos.,
(2015).
[13] G. Cuciniello, P. Leandri, S. Filippi, D. Lo, M. Losa, G. Airey, Effect of ageing on the morphology and
creep and recovery of polymer-modified bitumens, Mater. Struct., 3 (2012) 1–12.
[14] Khodaii, A. and Mehrara, A., (2003), “Evaluation of permanent deformation of unmodified and SBS
modified asphalt mixtures using dynamic creep test”, Construction and Building Materials, Volume 23, Issue 1,
pp. 2526–2532, Persian.
[15] Modarres, A., (2013), “Investigating the toughness and fatigue behavior of conventional and SBS modified
asphalt mixes”, Construction and Building Materials, Volume 41, pp. 212–222, Persian.
[16] Toraldo, E. and Mariani, E., (2014), “Effects of polymer additives on bituminous mixtures”, Construction
and Building Materials, Volume 65, pp. 32-42.
[11] Mohammed, S. A., (2014), “Toward an Improved Model for Permanent Deformation of Sbs-Modified
Asphalt Mixtures”, Degree of Master of Science in Transportation Engineering, University of Nottingham.
[12] Hao, J., Cao, P., Liu, Z., Wang, Z. and Xia, S., (2011), “Developing of a SBS polymer modified bitumen to
avoid low temperature cracks in the asphalt facing of a reservoir in a harsh climate region”, Construction and
Building Materials, Volume 150, pp. 105-113.
[13] Zhang, D., Zhang, H. and Shi, C., (2011), “Investigation of aging performance of SBS modified asphalt
with various aging methods”, Construction and Building Materials, Volume 145, pp. 445-451.
[20] Fakhri, M., (2006), Application of polymer in improving the properties of bitumens and asphalt mixtures,
Ministry of Roads and Transportation, Deputy of Education, Research and Technology, Transportation Research
Institute, Persian.
[21] Sadr al-Dini Mehrjardi, M. R., Yousefi, A. And Kavousi, A., "Improving the properties of bitumen with
polymeric materials", Journal of Polymer Science and Technology, Year 15, Number 2, 2002, Persian.