The expansion of knowledge on how fibers affect mortar has led to recommendations for structural design. In this study, the effect of HPFRCC on the performance of reinforced concrete beams with and without polypropylene fibers on the energy absorption and hardness of the specimens was investigated. In this regard, a reference beam and four beams reinforced with a thin layer of HPFRCC in the lower part of the beams with polypropylene fibers were tested under a four-point bending test and the effect of reinforcement on energy absorption and hardness was investigated and compared.
1.Aveston. J. Cooper G.A and Kelly A. 1971. “single and multiple fracture, the properties of fiber composites” conference proceedings of national phusical laboratory, IPC, Science and technology press, Ltd , 14-24. 2.Bolander, J.1999. “Spring network model of fiber reinforced cement composites” high performance fiber reinforced cement composites. HPFRCC 3, H.W. Reingardt and A.E. Naaman 341-350 3.Curbach , M. and jesse, f. 1999, “High-performance textile-reinforced concrete” structural engineering international 9(4,1):289-291(3). 4.Krenchel H. and stang H.1989 “stable microcracking in cementitious materials” in brittle matrix composites 2.A.M. Brandt and J.H. Marshall, eds. 20-33. 5.Naaman A.E. 2003 “Engineered steel fibers wigh optimal properties for reinforcement of cement composites. Journal of advanced concrete technology. 1(3) 241-252. 6.Naaman, A.E. and Reinhardt, H.W. 2003. “setting the stage : toward performance- based classification of FRC composites” in high performance fiber reinforced cement composites (HPFRCC-4) proc. Of the 4th int l RILEM workshop. A.E. Naaman and H.W Reinhardt. 7.Naaman A.E.1992. “SIFCON: tailored properties for structural performance” in high performance fiber reinforced cement composites, H.W. Reinhardt and A.E. naaman , eds. 18-38. 8.Romualdi J.P. and batson G.B. 1963 “mechanics of crack arrest in concrete”. Journal of Engineering Mechanics, ASCE Proc. 89(EM3) :147-168. 9.Romualdi J.P. and mandel J.A 1964 “tensile strength of concrete affected by uniformaly distributed and closely spaced short lengths of wire reinforcement”. Journal of ACI , 657-670 . 10.Vandewalle, L. et al 2003. “RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete” sigma-epsilon-design method-final recommendation. Materials and structures 36(262):560-567.
Alizadeh Lasaki, R. (2019). Investigation and Comparison of Parameters of Energy Absorption and Hardening in Turbet reinforcement with and without Polypropylene Fibers and HPFRCC Technology. Civil and Project journal, 1(6), 25-33.
MLA
Alizadeh Lasaki, R. "Investigation and Comparison of Parameters of Energy Absorption and Hardening in Turbet reinforcement with and without Polypropylene Fibers and HPFRCC Technology", Civil and Project journal, 1, 6, 2019, 25-33.
HARVARD
Alizadeh Lasaki R. (2019). 'Investigation and Comparison of Parameters of Energy Absorption and Hardening in Turbet reinforcement with and without Polypropylene Fibers and HPFRCC Technology', Civil and Project journal, 1(6), pp. 25-33.
CHICAGO
R. Alizadeh Lasaki, "Investigation and Comparison of Parameters of Energy Absorption and Hardening in Turbet reinforcement with and without Polypropylene Fibers and HPFRCC Technology," Civil and Project journal, 1 6 (2019): 25-33,
VANCOUVER
Alizadeh Lasaki R. Investigation and Comparison of Parameters of Energy Absorption and Hardening in Turbet reinforcement with and without Polypropylene Fibers and HPFRCC Technology. CPJ. 2019;1(6):25-33 (In Persian).
