Review of the Use of Fog Seal Protection Asphalt in Pavement

Document Type : Review Article

Authors

1 University instructor, Engineering Faculty, University of Applied Sciences, Zanjan Branch, Zanjan, Iran

2 Department of Civil Engineering, Nowshahr Branch, Islamic Azad University, Nowshahr, Iran

Abstract
The use of new asphalts with the aim of increasing the life of the pavement and reducing the maintenance costs of the pavement is of great importance. Continuous investigation and evaluation of the causes of failure is a necessary thing that failure to pay attention to it will intensify the failure and transfer it to the underlying layers, which will lead to complete failure of the pavement and impose very high costs. Timely use of protective asphalt can improve the service level of pavement and increase its life, also increase wear and improve existing asphalt and concrete procedures and be used to make the road surface impermeable. Protective asphalt is usually used as a temporary coating in the road construction industry and is not one of the main components of the road body. This layer is mostly used to make the asphalt impermeable and to prevent erosion of the main layer. Using it can strengthen the main layer of asphalt which is on the road. Due to the types of protective asphalts, each of which has its own application and characteristics, they are spread on the road surface. These asphalts include chip seal, fog seal, seal coat, slur seal and micro-surfacing. Studies on fog seal protective asphalt have been collected and reviewed in recent years. The results show that the use of sand seal grout with epoxy emulsion shows resistance to skid and frustration, which its use for sealing and prevention at the pavement surface increases the resistance to skid. Fog seal can be effective in minimizing water absorption and air permeability, and such findings suggest that sealants using biomaterials can be a viable alternative to asphalt pavements. Adding oil (environmental-oil) reduces the need for asphalt adhesion and leads to energy savings. In general, the use of fog seal protects the pavement against cracking and erosion of asphalt, increasing the length of the pavement, delaying major repairs, reducing permeability due to sealing and damage due to moisture

Keywords

Cui, P., Wu, S., Xu, H., & Lv, Y. (2019). Silicone resin polymer used in preventive maintenance of
asphalt mixture based on fog seal. Polymers, 11(11), 1114.
Edenhofer, O. (Ed.). (2015). Climate change 2014: mitigation of climate change (Vol. 3). Cambridge
University Press, New York.
Feng, P., Wang, H., Zhang, X., Hasan, M. R. M., You, Z., & Gao, J. (2020). Study on workability and
skid resistance of bio-oil–modified fog seal with sand. Journal of Testing and Evaluation, 41(3).
Ghosh, D., Turos, M., & Marasteanu, M. (2016). Evaluation of bio-fog sealants for pavement
preservation. Report No. MN/RC 2016-20. University of Minnesota.
Gransberg, D., Pidwerbesky, B., & James, D. M. (2005, October). Analysis of New Zealand chip seal
design and construction practices. In Transportation Research Circular No. E-C021: Roadway
Pavement Preservation 2005: Papers from the First National Conference on Pavement Preservation,
Kansas City, Missouri October 31–November 1 (pp. 3-15).
Haas, R., Hudson, W. R., & Zaniewski, J. P. (1994). Modern pavement management.
Houghton, E. (1996). Climate change 1995: The science of climate change: contribution of working
group I to the second assessment report of the Intergovernmental Panel on Climate Change (Vol. 2).
Cambridge University Press.
Hu, C., Li, R., Zhao, J., Leng, Z., & Lin, W. (2020). Performance of Waterborne Epoxy Emulsion Sand
Fog Seal as a Preventive Pavement Maintenance Method: From Laboratory to Field. Advances in
Materials Science and Engineering, 2020.
Islam, R. M., Arafat, S., & Wasiuddin, N. M. (2012). Quantification of reduction in hydraulic
conductivity and skid resistance caused by fog seal in low-volume roads. Transportation Research
Record, 2652(1), 99-101.
Jiang, Y., Yi, Y., Tian, T., Fan, J., Yuan, K., Deng, C., & Xue, J. (2020). Development and Application
of Skid Resistance Fog Seal for Pavements. Coatings, 10(9), 162.
Johnson, A. M. (2000). Best practices handbook on asphalt pavement maintenance. Retrieved from
https://ntl.bts.gov/lib/1100001150001159602000-04.pdf.
www.cpjournals.com ISSN:6262-155X )Civil & Project Journal)CPJ(( نشریه عمران و پروژه
ػال ػ مَ، د سٍ 3، ؿواس 1، فش سٍدیی 1400 ،ؿواس پیاپی 23 ،کفح 73 تا کفح 84
77
Kebede, A. A. (2016). Asphalt pavement preservation using rejuvenating fog seals.
Kim, Y. R., & Im, J. H. (2012). Fog seal effectiveness for bituminous surface treatments. Report No.
HWY-2010-02, North Carolina Department of Transportation, Raleigh, NC
Mamlouk, M. S., & Zaniewski, J. P. (1991). Pavement preventive maintenance: Description,
effectiveness, and treatments. In Flexible pavement rehabilitation and maintenance. ASTM
International. Retrieved from https://compass-astmorg.
proxy.lib.iastate.edu/download/STP12156S.4299.pdf.
Nedevksa, I., Ognjenovic, S., & Pustovgar, A. (2012). Review on the Pavement-repairing Measures as
a Condition for the Choice of Road-Maintenance Strategy. MATEC Web of Conferences.
Yang, B., Zhang, Y., Ceylan, H., & Kim, S. (2020). Evaluation of bio-based fog seal for low-volume
road preservation. International Journal of Pavement Research and Technology, 1-10.
Yang, B., Zhang, Y., Ceylan, H., & Kim, S. (2019). Assessing Bio-Based Fog Seal for Asphalt
Pavement Preservation.
  • Receive Date 19 March 2021
  • Revise Date 23 March 2021
  • Accept Date 20 April 2021
  • First Publish Date 20 April 2021
  • Publish Date 21 March 2021