[1] P. Van Den Heede and N. De Belie, “Cement & Concrete Composites Environmental impact and life cycle assessment
(LCA) of traditional and „green‟ concretes: Literature review and theoretical calculations,” Cem. Concr. Compos., vol.
34, no. 4, pp. 431–442, 2012.
[2] M. Suhr et al., Best Available Techniques (BAT). Reference Document for the Production of Cement, Lime and
Magnesium Oxide. 2015.
[3] A. Esparham, A. B. Moradikhou, F. K. Andalib, and M. J. Avanaki, “Strength characteristics of granulated ground
blast furnace slag-based geopolymer concrete,” Advances in concrete construction, vol. 11, no. 3, pp. 219–229, Mar.
2021.
[4] A. Esparham, A. B. Moradikhou, M. J. Jamshidi Avanaki, “Effect of Various Alkaline Activator Solutions on
Compressive Strength of Fly Ash-Based Geopolymer Concrete,” Journal of civil Engineering and Materials
Application, vol.4, no. 2, pp. 115-123, 2020.
[5] A. B. Moradikhou, A. Esparham, M. J. Jamshidi Avanaki, “Effect of Hybrid Fibers on Water absorption and
Mechanical Strengths of Geopolymer Concrete based on Blast Furnace Slag,” Journal of civil Engineering and
Materials Application, vol.3, no. 4, pp. 193-201, 2019.
[6] A. Esparham, A. B. Moradikhou, “A Novel Type of Alkaline Activator for Geopolymer Concrete Based on Class C
Fly Ash, ” Advance Researches in Civil Engineering, vol.3, no. 1, pp. 1-13, 2021.
[7] B. Tempest, O. Sanusi, J. Gergely, V. Ogunro, and D. Weggel, “Compressive Strength and Embodied Energy
Optimization of Fly Ash Based Geopolymer Concrete,” 2009 World Coal Ash Conf., pp. 1–17, 2009.
[8] E. Von Weizsacker, K. Hargroves, M. Smith, C. Desha, and P. Stasinopoulos, Factor Five: Transforming the Global
Economy through 808 Improvements in Resource Productivity. London: Earthscan/Routledge, 2009.
[9] B. C. McLellan, R. P. Williams, J. Lay, A. Van Riessen, and G. D. Corder, “Costs and carbon
emissions for geopolymer pastes in comparison to ordinary Portland cement,” J. Clean. Prod., vol. 19, no. 9–10, pp.
1080–1090, 2011.
[10] D. Stengel, T., Reger, T., Heinz, “Life Cycle Assessment of Geopolymer Concrete – What is the Environmental
Benefit?” CIA.
[11] BS EN ISO 14040, Environmental Management - Life Cycle Assessment - Principles an Framework, vol. 3. 2006.
[12] P. Purnell and L. Black, “Embodied carbon dioxide in concrete: Variation with common mix design parameters,”
Cem. Concr. Res., vol. 42, no. 6, pp. 874–877, Jun. 2012.
[13] C. Chen, G. Habert, Y. Bouzidi, A. Jullien, and A. Ventura, “Resources, Conservation and Recycling LCA allocation
procedure used as an incitative method for waste recycling: An application to mineral additions in concrete"
Resources, Conserv. Recycl., vol. 54, no. 12, pp. 1231–1240, 2010.
[14] Directive 2008/98/EC, “Waste Framework Directive,” Off. J. Eur. Union, vol. 312, pp. 3–30, 2008.
[15] MPA, “Fact Sheet 18 Embodied CO 2 e of UK cement, additions and cementitious material,” pp. 1–8, 2015.
[16] G. Habert and C. Ouellet-Plamondon, “Recent update on the environmental impact of geopolymers,” RILEM Tech.
Lett., vol. 1, pp. 17–23, 2016.
[17] SIRIM, “Malaysia Life Cycle Inventory Database,” 2018. [Online]. Available: http://lcamalaysia.sirim.my/.
[Accessed: 23-Mar-2018].
www.cpjournals.com ISSN:6262-155X )Civil & Project Journal)CPJ(( نشریه عمران و پروژه
ػال ػ مَ، د سٍ 3، ؿواس 2، اسدیث ْت 1400 ،ؿواس پیاپی 24 ،کفح 22 تا کفح 31
21
[18] J. Guinée, Handbook on Life Cycle Assessment: Operational Guide to the ISO Standards, 1st ed. Springer Netherlands,
2002.
[19] M. Goedkoop, R. Heijungs, M. Huijbregts, A. De Schryver, J. Struijs, and R. Van Zelm, “ReCiPe 2008,” Potentials,
pp. 1–44, 2009.
