عمران و پروژه
اعتبار،چابکی،پاسخگویی

*Optimizing Roughness Parameters for Enhanced Hydraulic Jump Control in Ogee Spillway Stilling Basins

https://doi.org/10.22034/cpj.2025.558125.1410
دوره 7، شماره 11 - شماره پیاپی 81
بهمن 1404
صفحه 24-48
عمران و پروژه

نوع مقاله : مقاله پژوهشی

نویسندگان

سید علیرضا روانفر
روزبه آقامجیدی

استادیار، دانشکده مهندسی، دانشگاه آزاد اسلامی ‌‌واحد سپیدان، فارس، ‌ایران

چکیده
The effect of surface roughness (height and spacing) on the hydraulic jump behavior in the downstream section of an Ogee weir, which is a stilling basin, was explored in this research. In line with this, a numerical simulation was performed of the flow patterns and geometric features around the valve is other peak weir by a Fluent software. Results from these computations were compared with experimental data, which was recorded from a real model constructed at Islamic Azad University of Yasuj. The results indicated that a roughness is added to the bed of the channel and has significant impact on the hydraulic jumps and their features. More specifically, the addition of roughness results in shorter jumps and relative secondary depth (of the same order of magnitude). With the increase of the roughness elements height, the relative depth of the secondary to primary decreases. This transition happens as the rough surface affects the flow and shortens the hydraulic jump, reducing the difference between the principal and secondary depths. Moreover, performance of hydraulic jump enhanced with the increase of roughness height. The best-performing spacing and height of roughness elements were found to be 2 centimetres. These findings are essential for engineers and designers engaged in the development of hydraulic structures such as Ogee weirs. It helps them to design systems that provide better energy dissipation and flow control by understanding the effects of roughness on hydraulic jump behaviour. An example of where this could be leveraged would be using correctly-sized roughness elements in MVSP channels to enable most efficient and compact structure thus reducing construction costs without compromising, and in some cases enhancing, function. Therefore, this study proves momentous for the better understanding of the effects of surface roughness on the phenomenon of hydraulic jumps, offering practical implications for hydraulic systems design and optimization.

کلیدواژه‌ها

Ogee Weir
Two-Phase Model
‌ Fluent Software
Hydraulic Jump
Roughness
موضوعات
Azamathulla, H. M., Ghani, A. A., & Fei, S. Y. (2012). ANFIS-based approach for predicting sediment transport in
clean sewer. Applied Soft Computing, 12(3), 1227–1230. https://doi.org/10.1016/j.asoc.2011.10.023
Beltaos, S. (2002). Shear stress in hydraulic jump. Journal of Hydraulic Research, 40(4), 509–513.
https://doi.org/10.1080/00221680209499892
Benedict, A. (2015). Energy dissipation in hydraulic systems. Journal of Hydraulic Engineering, 141(5), 04014088.
Carollo, F. G., Ferro, V., & Pampalone, V. (2007). Hydraulic jumps on rough beds. Journal of Hydraulic
Engineering, 133(9), 989–999. https://doi.org/10.1061/(ASCE)0733-9429(2007)133:9(989)
Chanson, H. (2009). Turbulent air-water flows in hydraulic structures: Dynamic similarity and scale effects.
Environmental Fluid Mechanics, 9(2), 125–142. https://doi.org/10.1007/s10652-008-9078-3
Chanson, H. (2015). Hydraulic design of spillways. Journal of Hydraulic Research, 53(2), 128–139.
Date, V., et al. (2017). CFD modeling of ogee spillways using the VOF model. Journal of Applied Mechanical
Engineering, 2168(9873), 1000287.
Dey, S., Sarkar, S., & Bose, S. K. (2018). Hydraulic jump characteristics on rough beds. Journal of Hydraulic
Engineering, 144(7), 04018037.
Esmaeili Varaki, M., & Razavizadeh, M. (2013). Hydraulic characteristics of congressional weirs. Water and Soil
Science, 27(1), 224–234.
Ferrari, A. (2010). SPH simulation of free surface flow over a sharp-crested weir. Advances in Water Resources,
33(2), 270–610.
Foroudi, F., et al. (2013). Discharge coefficient determination for ogee spillways. Journal of Hydraulic Research,
51(4), 316–322.
Foroudi, F., et al. (2013). Ogee spillway discharge coefficients: A comparative study. Hydraulic Structures and
Design, 39(2), 121–133.
Hager, W. H. (1992). Energy dissipators and hydraulic jump. Springer Science & Business Media.
Haktanir, T., & Citakoglu, N. (2016). An optimal algorithm for ogee spillway discharge. Hydrological Sciences
Journal, 58(5), 1013–1031.
Kumar, A., et al. (2012). Discharge characteristics of sharp-crested weirs under axial arc conditions. Journal of
Hydraulic Engineering, 138(11), 959–967.
Lee, J. H., & You, D. (2020). Machine learning for fluid mechanics: A brief review. Journal of Fluid Science and
Technology, 15(1), 1–15. https://doi.org/10.1299/jfst.2020jfst0001
Morales, V., et al. (2012). Numerical modeling of ogee crest spillways. Water Resources Management, 26(14), 4113–
4127.
Muzammil, M., & Kumar, V. (2016). Energy dissipation in hydraulic jumps. Procedia Engineering.
Pagliara, S., & Palermo, M. (2015). Hydraulic jumps on rough and smooth beds: Aggregate downstream water level
prediction. Journal of Hydraulic Research, 53(2), 243–249. https://doi.org/10.1080/00221686.2014.967820
Pfister, M., & Chanson, H. (2014). Two-phase air-water flow characteristics of stepped spillways with large step
heights. Journal of Hydraulic Engineering, 140(7), 04014028. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000876
Rajaratnam, N. (1967). Hydraulic jumps. Annual Review of Fluid Mechanics, 1(1), 309–330.
https://doi.org/10.1146/annurev.fl.01.010169.001521
Swamee, P. K., Shekhar, C. H., & Talib, M. (2011). Discharge characteristics of skew weirs. Journal of Hydraulic
Research, 49(6), 817–820.
Tullis, B. P., & Neilson, J. (2008). Performance of submerged ogee-crest weirs. Journal of Hydraulic Engineering,
134(4), 486–491.
Wu, S., & Rajaratnam, N. (1996). Effect of roughness on flow resistance in open channels. Journal of Hydraulic
Engineering, 122(12), 690–696. https://doi.org/10.1061/(ASCE)0733-9429(1996)122:12(690)
  • تاریخ دریافت 16 آبان 1404
  • تاریخ بازنگری 21 آبان 1404
  • تاریخ پذیرش 29 آذر 1404
  • تاریخ اولین انتشار 29 آذر 1404
  • تاریخ انتشار 01 بهمن 1404

صفحه اصلی

ارسال مقاله

تماس با ما

مقالات در نوبت انتشار