Abbas, R., Khereby, M. A., Ghorab, H. Y., & Elkhoshkhany, N. (2020). Preparation of geopolymer
concrete using Egyptian kaolin clay and the study of its environmental effects and economic
cost. Clean Technologies and Environmental Policy, 22, 669-687 .
Abhilash, P., Sashidhar, C., & Reddy, I. R. (2016). Strength properties of Fly ash and GGBS based Geopolymer
Concrete. Int. J. ChemTech Res, 9(3), 350-356 .
Ahmed, H. U., Mohammed, A. A., Rafiq, S., Mohammed, A. S., Mosavi, A., Sor, N. H., & Qaidi, S. M.
(2 .)021Compressive strength of sustainable geopolymer concrete composites: a state-of-the-art
review. Sustainability, 13(24), 13502 .
Alahmari, T. S., Abdalla, T. A., & Rihan, M. A. M. (2023). Review of recent developments regarding
the durability performance of eco-friendly geopolymer concrete. Buildings, 13(12), 3033 .
Aliabdo, A. A., Abd Elmoaty, M., & Salem, H. A. (2016). Effect of water addition, plasticizer and
alkaline solution constitution on fly ash based geopolymer concrete performance. Construction
and building materials, 121, 694-703 .
Alsubari, B., Shafigh, P., Ibrahim, Z., Alnahhal, M. F., & Jumaat, M. Z. (2018). Properties of ecofriendly
self-compacting concrete containing modified treated palm oil fuel ash. Construction
and building materials, 158, 742-754 .
Andrade, C., d’Andrea, R., & Rebolledo, N. (2014). Chloride ion penetration in concrete: The reaction
factor in the electrical resistivity model. Cement and concrete composites, 47, 41-46 .
Anjomshoa, E. (2024a). The application of building information modeling (BIM) system in the
smartification of green and sustainable buildings. Engineering, Construction and Architectural
Management .
Anjomshoa, E. (2024b). Investigation of lightweight gypsum based on montmorillonite nanoclay with
enhanced insulation properties. International Journal of Building Pathology and Adaptation .
Anjomshoa, E. (2024c). Key performance indicators of construction companies in branding products
and construction projects for success in a competitive environment in Iran. Engineering,
Construction and Architectural Management, 31(5), 2151-2175 .
Anuradha, R., Thirumala, R., & John, P. N. (2014). Optimization of molarity on workable selfcompacting
geopolymer concrete and strength study on SCGC by replacing fly ash with silica
fume and GGBFS. Int. J. Adv. Struct. Geotech. Eng, 3(1), 11-18 .
Ariffin, M., Bhutta, M., Hussin, M., Tahir, M. M., & Aziah, N. (2013). Sulfuric acid resistance of
blended ash geopolymer concrete. Construction and building materials, 43, 80-8 .6
Arun, B., Nagaraja, P., & Srishaila, J. (2019). An effect of NaOH molarity on fly ash—metakaolinbased
self-compacting geopolymer concrete. Sustainable construction and building materials:
Select Proceedings of ICSCBM 2018 ,
ASTM, A. (2017). C150/C150M-17, standard specification for Portland cement. Am. Soc. Test. Mater.
West Conshohocken, PA, USA .
Bernal, S. A., De Gutiérrez, R. M., & Provis, J. L. (2012). Engineering and durability properties of
concretes based on alkali-activated granulated blast furnace slag/metakaolin blends.
Construction and building materials, 33, 99-108 .
Castel, A. (2016a). Bond between steel reinforced and geopolymer concrete Ch14. pdf. Handb. Low
Carbon Concr, 375-386 .
11 Na2SiO3
27 / حکاک زاده,علیرضا ،دشتی رحمت آبادی,محمد علی -46 ،)10( 6 ، نشریه عمران و پروژه، 1403
42
Castel, A. (2016b). Bond between steel reinforcement and geopolymer concrete. Handbook of low
carbon concrete, 375-387 .
Chen, R., Ahmari, S., & Zhang, L. (2014). Utilization of sweet sorghum fiber to reinforce fly ash-based
geopolymer. Journal of Materials science, 49, 2548-2558 .
Chen, W., & Brouwers, H .)2007( .The hydration of slag, part 1: reaction models for alkali-activated
slag. Journal of Materials science, 42, 428-443 .
Chi, M. (2012). Effects of dosage of alkali-activated solution and curing conditions on the properties
and durability of alkali-activated slag concrete. Construction and building materials, 35, 240-
245 .
Chindaprasirt, P., & Chalee, W. (2014). Effect of sodium hydroxide concentration on chloride
penetration and steel corrosion of fly ash-based geopolymer concrete under marine site .
Construction and building materials, 63, 303-310 .
Chithra, S., & Dhinakaran, G. (2014). Effect of hot water curing and hot air oven curing on admixed
concrete. International Journal of ChemTech Research, 6(2), 1516-1523 .
Collins, F., & Sanjayan, J. (20 .)01Microcracking and strength development of alkali activated slag
concrete. Cement and concrete composites, 23(4-5), 345-352 .
Corinaldesi, V., & Moriconi, G. (2009). Influence of mineral additions on the performance of 100%
recycled aggregate concrete .Construction and building materials, 23(8), 2869-2876 .
Davidovits, J. (1999). Chemistry of Geopolymeric systems, terminology in: proceedings of 99
international conference. eds. Joseph Davidovits, R. Davidovits & C. James, France .
Deb, P. S., Sarker ,P. K., & Barbhuiya, S. (2016). Sorptivity and acid resistance of ambient-cured
geopolymer mortars containing nano-silica. Cement and concrete composites, 72, 235-245 .
Değirmenci, F. N. (2018). Freeze-Thaw and fire resistance of geopolymer mortar based on natural and
waste pozzolans .
Dimas, D., Giannopoulou, I., & Panias, D. (2009). Polymerization in sodium silicate solutions: a
fundamental process in geopolymerization technology. Journal of Materials science, 44(14),
3719-3730 .
Embong, R., Kusbiantoro ,A., Shafiq, N., & Nuruddin, M. F. (2016). Strength and microstructural
properties of fly ash based geopolymer concrete containing high-calcium and water-absorptive
aggregate. Journal of Cleaner Production, 112, 816-822 .
Farooq, F., Jin, X., Javed, M. F ,.Akbar, A., Shah, M. I., Aslam, F., & Alyousef, R. (2021). Geopolymer
concrete as sustainable material: A state of the art review. Construction and building materials,
306, 124762 .
Fernández-Jiménez, A., Palomo, A., & Criado, M. (2005). Microstructure development of alkaliactivated
fly ash cement: a descriptive model. Cement and Concrete Research, 35(6), 1204-
1209 .
Fu, Y., Cai, L., & Yonggen, W. (2011). Freeze–thaw cycle test and damage mechanics models of alkaliactivated
slag concrete. Construction and building materials, 25(7), 3144-3148 .
Giasuddin, H. M., Sanjayan, J. G., & Ranjith, P. (2013). Strength of geopolymer cured in saline water
in ambient conditions. Fuel, 107, 34-39 .
Görhan, G., & Kürklü, G. (2014). The influence of the NaOH solution on the properties of the fly ashbased
geopolymer mortar cured at different temperatures. Composites part b: engineering, 58,
371-377 .
Gunasekara, C., Law, D. W., & Setunge, S. (2016). Long term permeation properties of different fly ash
geopolymer concretes. Construction and building materials, 124, 352-362 .
Guoping, L., Fangjian, H., & Yongxian, W. (2011). Chloride ion penetration in stressed concrete.
Journal of Materials in Civil Engineering, 23(8), 1145-1153 .
Halim, L. N., & Ekaputri, J. J .)2017( .The influence of salt water on chloride penetration in geopolymer
concrete. MATEC Web of Conferences ,
Hardjito, D., & Rangan, B. V. (2005). Development and properties of low-calcium fly ash-based
geopolymer concrete .
Hardjito, D., Wallah, S., Sumajouw ,D., & Rangan, B. (2005). Introducing fly ash-based geopolymer
concrete: manufacture and engineering properties. 30th conference on our world in concrete &
structures ,
27 / حکاک زاده,علیرضا ،دشتی رحمت آبادی,محمد علی -46 ،)10( 6 ، نشریه عمران و پروژه، 1403
43
Hardjito, D., Wallah, S. E., Sumajouw, D., & Rangan, B. (2004a). Brief review of development of
geopolymer concrete. 8th CANMET/ACI International Conference on fly ash, silica fume, slag
and natural pozzolans in concrete. Las Vegas (USA) ,
Hardjito, D., Wallah, S. E., Sumajouw, D. M., & Rangan, B. V. (2004b). On the development of fly ashbased
geopolymer concrete. Materials Journal, 101(6), 467-472 .
Hassan, A., Arif, M., & Shariq, M. (2019a). Effect of curing condition on the mechanical properties of
fly ash-based geopolymer concrete. SN Applied Sciences, 1, 1-9 .
Hassan, A., Arif, M & ,.Shariq, M. (2019b). Use of geopolymer concrete for a cleaner and sustainable
environment–A review of mechanical properties and microstructure. Journal of Cleaner
Production, 223, 704-728 .
Heah, C., Kamarudin, H., Al Bakri, A. M., Binhussain, M., Luqman ,M., Nizar, I. K., Ruzaidi, C., &
Liew, Y. (2011). Effect of curing profile on kaolin-based geopolymers. Physics Procedia, 22,
305-311 .
Hemalatha, T., & Ramaswamy, A. (2017). A review on fly ash characteristics–Towards promoting high
volume utilization in developing sustainable concrete. Journal of Cleaner Production, 147, 546-
559 .
Hwang, J. P., Shim, H. B., Lim, S., & Ann, K. Y. (2013). Enhancing the durability properties of concrete
containing recycled aggregate by the use of pozzolanic materials. KSCE Journal of Civil
Engineering, 17, 155-163 .
Ismail, I., Bernal, S. A., Provis, J. L., Hamdan, S., & van Deventer, J. S. (2013). Microstructural changes
in alkali activated fly ash/slag geopolymers with sulfate exposure. Materials and Structures, 46,
36 .373-1
Jaturapitakkul, C., Kiattikomol, K., Tangchirapat, W., & Saeting, T. (2007). Evaluation of the sulfate
resistance of concrete containing palm oil fuel ash. Construction and building materials, 21(7),
1399-1405 .
Jeyaseela, J. (2024). Study on workability and durability characteristics of self-compacting geopolymer
concrete composites .
Joseph, B., & Mathew, G. (2012). Influence of aggregate content on the behavior of fly ash based
geopolymer concrete. Scientia Iranica, 19(5), 1188-1194 .
Karahan ,O., & Yakupoğlu, A. (2011). Resistance of alkali-activated slag mortar to abrasion and fire.
Advances in cement research, 23(6), 289-297 .
Khale, D., & Chaudhary, R. (2007). Mechanism of geopolymerization and factors influencing its
development: a review .Journal of Materials science, 42(3), 729-746 .
Khan, M. Z. N., Shaikh, F. U. A., Hao, Y., & Hao, H. (2018). Effects of curing conditions and sand-tobinder
ratios on compressive strength development of fly ash geopolymer. Journal of Materials
in Civil Engineering, 30(2), 04017267 .
Kirupa, J., & Sakthieswaran, N. (2015). Possible materials for producing Geopolymer concrete and its
performance with and without Fibre addition-A State of the art review. International Journal of
Civil & Structural Engineering, 5(3), 296-307 .
Kishore, K., Pandey, A., Wagri, N. K., Saxena, A., Patel, J., & Al-Fakih, A. (2023). Technological
challenges in nanoparticle-modified geopolymer concrete: A comprehensive review on
nanomaterial dispersion, characterization techniques and its mechanical properties. Case
Studies in Construction Materials, e02265 .
Koksal, F., Gencel, O., & Kaya, M. (2015). Combined effect of silica fume and expanded vermiculite
on properties of lightweight mortars at ambient and elevated temperatures. Construction and
building materials, 88, 175-187 .
Kong, D. L., Sanjayan, J. G., & Sagoe-Crentsil, K. (2007). Comparative performance of geopolymers
made with metakaolin and fly ash after exposure to elevated temperatures. Cement and Concrete
Research, 37(1 .1589-1583 ,)2
Koushkbaghi, M., Alipour, P., Tahmouresi, B., Mohseni, E., Saradar, A., & Sarker, P. K. (2019).
Influence of different monomer ratios and recycled concrete aggregate on mechanical properties
and durability of geopolymer concretes. Construction and building materials, 205, 519-528 .
Kuenzel, C., Vandeperre, L. J., Donatello, S., Boccaccini, A. R., & Cheeseman, C. (2012). Ambient
temperature drying shrinkage and cracking in metakaolin‐based geopolymers. Journal of the
American Ceramic Society, 95(10), 3270-3277 .
27 / حکاک زاده,علیرضا ،دشتی رحمت آبادی,محمد علی -46 ،)10( 6 ، نشریه عمران و پروژه، 1403
44
Kupwade-Patil, K., & Allouche, E. N. (2013). Examination of chloride-induced corrosion in reinforced
geopolymer concretes. Journal of Materials in Civil Engineering, 25(10), 1465-1476 .
Leong, H. Y., Ong, D. E. L., Sanjayan, J. G & ,.Nazari, A. (2016). Suitability of Sarawak and Gladstone
fly ash to produce geopolymers: A physical, chemical, mechanical, mineralogical and
microstructural analysis. Ceramics International, 42(8), 9613-9620 .
Manzoor, T., Bhat, J. A., & Shah, A. H. (202 .)4Performance of geopolymer concrete at elevated
temperature− A critical review. Construction and building materials, 420, 135578 .
Medeiros, M., & Helene, P. (2008). Efficacy of surface hydrophobic agents in reducing water and
chloride ion penetration in concrete. Materials and Structures, 41, 59-71 .
Megahed, S. Y., Elthakeb, A. M., Mohamed, W. A., Nooman, M. T., & Soufy, W. H. (2019). The impact
of marine water on different types of coarse aggregate of geopolymer concrete. Journal of
Minerals and Materials Characterization and Engineering, 7(5), 330-353 .
Moon, J., Bae, S., Celik, K., Yoon, S., Kim, K.-H., Kim, K. S., & Monteiro, P. J. (2014).
Characterization of natural pozzolan-based geopolymeric binders. Cement and concrete
composites, 53, 97-104 .
Najafi Kani, E., & Allahverdi, A. (2009). Effects of curing time and temperature on strength
development of inorganic polymeric binder based on natural pozzolan. Journal of Materials
science, 44, 3088-3097 .
Nath, S., & Kumar, S. (2013). Influence of iron making slags on strength and microstructure of fly ash
geopolymer. Construction and building materials, 38, 924-930 .
Naveena, K., & Rao, H. (2016). A review on strength and durability studies on geopolymer concrete
produced with recycled aggregates. International Journal for Scientific Research and
Development, 4(07), 27-30 .
Nazari, A., Bagheri, A., & Riahi, S. (2011). Properties of geopolymer with seeded fly ash and rice husk
bark ash. Materials Science and Engineering: A, 528(24), 7395-7401 .
Neupane, K. (2016). Fly ash and GGBFS based powder-activated geopolymer binders: A viable
sustainable alternative of portland cement in concrete industry. Mechanics of Materials, 103,
110-122 .
Nurruddin, M. F., Sani, H., Mohammed, B. S., & Shaaban, I .)2018( .Methods of curing geopolymer
concrete: A review. International Journal of Advanced and Applied Sciences, 5(1), 31-36 .
Olivia, M., & Nikraz, H. (2012). Properties of fly ash geopolymer concrete designed by Taguchi method.
Materials & Design .198-191 ,36 ,)2015-1980(
Olivia, M., & Nikraz, H. (2013). Properties of fly ash geopolymer concrete in seawater environment.
Proceedings of the 13th East Asia-Pacific Conference on Structural Engineering and
Construction, EASEC 2013 ,
Pacheco-Torgal, F., Castro-Gomes, J., & Jalali, S. (2008a). Alkali-activated binders: A review. Part 2.
About materials and binders manufacture. Construction and building materials, 22(7), 1315-
1322 .
Pacheco-Torgal, F., Castro-Gomes, J., & Jalali, S. (2008b). Alkali-activated binders :A review: Part 1.
Historical background, terminology, reaction mechanisms and hydration products. Construction
and building materials, 22(7), 1305-1314 .
Pan, X., Shi, Z., Shi, C., Ling, T.-C., & Li, N. (2017). A review on concrete surface treatment Part I:
Types and mechanisms. Construction and building materials, 132, 578-590 .
Patankar, S. V., Ghugal, Y. M., & Jamkar, S. S. (2014). Effect of concentration of sodium hydroxide
and degree of heat curing on fly ash‐based geopolymer mortar. Indian journal of materials
science, 2014(1), 938789 .
Payá, J., Agrela, F., Rosales, J., Morales, M. M., & Borrachero, M. V. (2019). Application of alkaliactivated
industrial waste. In New Trends in Eco-Efficient and Recycled Concrete (pp. 357-424).
Elsevier .
Pilehvar, S., Cao, V. D., Szczotok, A. M., Carmona, M., Valentini, L., Lanzón, M., Pamies, R., &
Kjøniksen, A.-L. (2018). Physical and mechanical properties of fly ash and slag geopolymer
concrete containing different types of micro-encapsulated phase change materials. Construction
and building materials, 173, 28-39 .
Pritchard, G., & Speake, S. (1987). The use of water absorption kinetic data to predict laminate property
changes. Composites, 18(3), 227-232 .
27 / حکاک زاده,علیرضا ،دشتی رحمت آبادی,محمد علی -46 ،)10( 6 ، نشریه عمران و پروژه، 1403
45
Provis, J. L., & Bernal, S. A. (2014). Geopolymers and related alkali-activated materials. Annual Review
of Materials Research, 44(1), 299-327 .
Raijiwala, D., & Patil, H. (2010). Geopolymer concrete A green concrete. 2010 2nd international
conference on Chemical, Biological and Environmental Engineering ,
Rakhimova, N., & Rakhimov, R. (2014). A review on alkali-activated slag cements incorporated with
supplementary materials. Journal of Sustainable Cement-Based Materials, 3(1), 61-74 .
Reddy, C. J., & Elavenil, S. (2017). Geopolymer concrete with self-compacting: A review. Int. J. Civ.
Eng. Technol, 8(2), 163-172 .
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013). The mechanical properties of fly ash-based
geopolymer concrete with alkaline activators. Construction and building materials, 47, 409-
4 .18
Salami, B. A., Johari, M. A. M., Ahmad, Z. A., & Maslehuddin, M. (2017). Durability performance of
palm oil fuel ash-based engineered alkaline-activated cementitious composite (POFA-EACC)
mortar in sulfate environment. Construction and building materials, 131, 229-244 .
Sangeetha, B. (2015). Effect of Rice Husk Ash and GGBS on performance of concrete. Int. J. Eng. Res,
4, 491-495 .
Sanni, S. H., & Khadiranaikar, R. (2012). Performance of geopolymer concrete under severe
environmental conditions. International Journal of Civil & Structural Engineering, 3(2), 396-
407 .
Sata, V., Wongsa, A., & Chindaprasirt, P. (2013). Properties of pervious geopolymer concrete using
recycled aggregates. Construction and building materials, 42, 33-39 .
Sathonsaowaphak ,A., Chindaprasirt, P., & Pimraksa, K. (2009). Workability and strength of lignite
bottom ash geopolymer mortar. Journal of hazardous materials, 168(1), 44-50 .
Shafiq, I., Azreen, M., & Hussin, M. (2017). Sulphuric acid resistant of self compacted geopolymer
concrete containing slag and ceramic waste. MATEC Web of Conferences ,
Shaikh, F. U. A. (2016). Mechanical and durability properties of fly ash geopolymer concrete containing
recycled coarse aggregates. International Journal of Sustainable Built Environment, 5(2), 277-
287 .
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. (2015). Geopolymer concrete: A review of
some recent developments. Construction and building materials, 85, 78-90 .
Singh, N. B., & Middendorf, B. (2020). Geopolymers as an alternative to Portland cement: An overview.
Construction and building materials, 237, 117455 .
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011). NaOH-activated ground
fly ash geopolymer cured at ambient temperature. Fuel, 90 .2124-2118 ,)6(
Sood, H., Kumar, R., Jena, P. C., & Joshi, S. K. (2023). Eco-friendly approach to construction:
Incorporating waste plastic in geopolymer concrete. Materials Today: Proceedings .
Sukmak, P., De Silva, P., Horpibulsuk, S., & Chindaprasirt ,P. (2015). Sulfate resistance of clay-portland
cement and clay high-calcium fly ash geopolymer. Journal of Materials in Civil Engineering,
27(5), 04014158 .
Thaarrini, J., & Ramasamy, V. (2016). Properties of foundry sand, ground granulated blast furnace slag
and bottom ash based geopolymers under ambient conditions. Periodica Polytechnica Civil
Engineering, 60(2), 159-168 .
Thomas, B. S., Yang, J., Bahurudeen, A., Chinnu, S., Abdalla, J. A., Hawileh, R. A., & Hamada, H. M.
(2022). Geopolymer concrete incorporating recycled aggregates: A comprehensive review.
Cleaner Materials, 3, 100056 .
Venkatesan, R. P., & Pazhani, K. (2016). Strength and durability properties of geopolymer concrete
made with ground granulated blast furnace slag and black rice husk ash. KSCE Journal of Civil
Engineering, 20, 2384-2391 .
Wardhono, A., Gunasekara, C., Law, D. W., & Setunge, S. (2017). Comparison of long term
performance between alkali activated slag and fly ash geopolymer concretes. Construction and
building materials .279-272 ,143 ,
Wasim, M., Ngo, T. D., & Law, D. (2021). A state-of-the-art review on the durability of geopolymer
concrete for sustainable structures and infrastructure. Construction and building materials, 291,
123381 .
27 / حکاک زاده,علیرضا ،دشتی رحمت آبادی,محمد علی -46 ،)10( 6 ، نشریه عمران و پروژه، 1403
46
Wongpa, J., Kiattikomol, K., Jaturapitakkul, C., & Chindaprasirt, P. (2010). Compressive strength,
modulus of elasticity, and water permeability of inorganic polymer concrete. Materials &
Design, 31(10), 4748-4754 .
Yahya, Z., Abdullah, M. M. A. B., Hussin, K., Ismail, K. N., Abd Razak, R & ,.Sandu, A. V. (2015).
Effect of solids-to-liquids, Na2SiO3-to-NaOH and curing temperature on the palm oil boiler
ash (Si+ Ca) geopolymerisation system. Materials, 8(5), 2227-2242 .
Yip, C. K., Lukey, G. C., Provis, J. L., & Van Deventer, J. S .)2008( .Effect of calcium silicate sources
on geopolymerisation. Cement and Concrete Research, 38(4), 554-564 .
Zaid, O., Sor, N. A. H., Martínez-García, R., de Prado-Gil, J., Elhadi, K. M., & Yosri, A. M. (2024).
Sustainability evaluation, engineering properties and challenges relevant to geopolymer
concrete modified with different nanomaterials: A systematic review. Ain Shams Engineering
Journal, 15(2), 102373 .
Zhang, Z., Provis, J. L., Zou, J., Reid, A., & Wang, H. (2016). Toward an indexing approach to evaluate
fly ashes for geopolymer manufacture. Cement and Concrete Research, 85, 163-173 .
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang,
H. (2016). Fly ash-based geopolymer: clean production, properties and applications. Journal of
Cleaner Production, 125, 253-267 .